Wire Cutting Stripping Machine Model No. HSE-142
- Machine for 0 to 4 sq.mm – two wire at a time, 6 sq.mm – one wire at a time
- High Speed machine
- Upto 2 mid-marking (for middle strippings) possible
- Machine and Controls in a single housing
Salient Feature :
- Machine controlled with PLC.
- Touch panel display having easy to use graphic interface
- Fully automatic machine. Setting is completely digitized and mostly automatic.
- Machines for both side stripping.
(Can also do single side stripping and also only cutting).
- Compressor not required, Silent operation.
Performance Range
Wire Cross section |
Model HSE-142 : 0.2 to 4 mm2,
(Contact us for sizes outside this range) |
Length Selection |
Standard range: 50 mm to 9 meters, in steps of 1mm;
Range can be extended to get 20mm to 9 meters |
Accuracy |
+/- 0.2% (min. +/-1.5 mm) |
End Stripping |
Upto 15 mm at both ends (subject to material friction)
Partial as well as Complete stripping possible |
Middle Stripping |
Upto 2 windows marking. (Conditions apply, In select models only) |
Multiple Wire Processing |
Can process 2 wires at a time for Wires upto 4 Sq.mm.
For rigid wires, the machine may get de-rated. |
Wire Types |
Single core with single or multiple strands / Flexible or rigid |
Max. Outside Diameter |
4 mm |
Changeover setting time |
30 sec typically. |
Technical Data
Machine Housing |
Machine housed in "Industrial" sheet steel fabrication. |
Mechanical system |
Rugged machine with precision mechanical system |
Electronic system |
PLC and drives |
Wire feed system |
2 motors with 4 feed rollers, variable speed |
Cutting & Stripping system |
V blade pair with motor,
variable speed and PLC controlled strokes |
Length Measurement system |
Directly by a servo Stabilizer is a must / Servo motor control |
Power |
220V / 50 Hz, other options upon request |
Compressed air |
5 to 7 bar, 70 to 100 psi, 40 lpm (less than 0.5 hp) |
Machine size |
Table top machine |
Production Speed :
Style |
100 mm |
300 mm |
Cutting and both
Side stripping |
4500 / hr (8000 / hr) |
4000 / hr (7000 / hr) |
- Speed for 0.5 sq mm multi-strand wires.
- Speeds mentioned in bracket are with two wires at a time.
Attachments : Twisting attachment is available (at extra cost) for this machine (conditions apply) Slitting attachment is available (at extra cost) for this machine (conditions apply)
Voltage Servo-stabilizer (2 KVA) or CVT (1 KVA) is must, to be arranged by you. Proper earthing is essential.