Wire Cutting Stripping Machine Model No. HSE-141
- Machine for 2 wires at a time, of upto1.5 mm2
- High Speed machine
- Upto 2 mid-marking (for middle strippings) possible
- Machine and Controls in a single housing
Salient Feature :
- Machine controlled with PLC.
- Touch panel display having easy to use graphic interface
- Fully automatic machine. Setting is completely digitized and mostly automatic.
- Machines for both side stripping.
(Can also do single side stripping and also only cutting).
- "MICROPROCESSOR controlled machines with smart display.
- Fully automatic machine. Setting is completely digitized and mostly automatic.
- Compressor not required, Silent operation.
Performance Range
| Wire Cross section |
Model HSE-141 : 0.2 to 1.5 mm2,
(Contact us for sizes outside this range) |
| Length Selection |
Standard range: 50 mm to 9 meters, in steps of 1mm;
Range can be extended to get 20mm to 9 meters |
| Accuracy |
+/- 0.2% (min. +/-1.5 mm) |
| End Stripping |
Upto 15 mm at both ends (subject to material friction)
Partial as well as Complete stripping possible |
| Middle Stripping |
Upto 2 windows marking. (Conditions apply, In select models only) |
| Multiple Wire Processing |
Can process 2 wires at a time for Wires upto 1.5 Sq.mm.
For rigid wires, the machine may get de-rated. |
| Wire Types |
Single core with single or multiple strands / Flexible or rigid |
| Max. Outside Diameter |
4 mm |
| Changeover setting time |
30 sec typically. |
Technical Data
| Machine Housing |
Machine housed in “Industrial” sheet steel fabrication. |
| Mechanical system |
Rugged machine with precision mechanical system |
| Electronic system |
PLC and drives |
| Wire feed system |
2 motors with 4 feed rollers, variable speed |
| Cutting & Stripping system |
Directly by Stepper / Servo motor control |
| Power |
220V / 50 Hz, other options upon request |
| Compressed air |
5 to 7 bar, 70 to 100 psi, 40 lpm (less than 0.5 hp) |
| Machine size |
Table top machine |
Production Speed :
| Style |
100 mm |
300 mm |
| Cutting and both Side stripping |
3000 / hr (5700 / hr) |
2500 / hr (4800 / hr) |
- Speed for 0.5 sq mm multi-strand wires.
- Speeds mentioned in bracket are with two wires at a time.
Attachments : Twisting attachment is available (at extra cost) for this machine (conditions apply) Slitting attachment is available (at extra cost) for this machine (conditions apply)
Voltage Servo-stabilizer (2 KVA) or CVT (1 KVA) is must, to be arranged by you. Proper earthing is essential.
